One Source Service
14624 - 102 Avenue
Surrey, BC V3R 7E5
Canada
Tel          (604) 582-1946  
Toll Free  877-756-8227 
daniel@infoserve.net

7 Days a week 10:00am to 9:00pm  Pacific Time


 

SPECIALIZING IN WYSE TERMINALS AND  ALTOS LINK ISOETEC DIGITAL

My name is Daniel Groulx I am the owner of One Source Service I've been in the computer field for over 20 years and I've been repairing and selling terminals for over 13 years.  Servicing end users and dealers across Canada.   When you have your terminal repaired at One Source Service all high failure parts are replaced even if there are still 'good'.  The CRT is rejuvenated which brings back its clarity.   The communication ports are also tested.  In some situations the board may be almost completely resoldered.  I can also refurbish the terminal which includes replacing all high failure parts and installing a brand  new picture tube (CRT) and provide a two year warranty for less then half the cost of a new terminal.  I have repaired over 1000 Wyse terminals so you can be assured that your terminal gets repaired by a qualified technician.    

Wyse 30/50/60 boards repaired for $35 CAD including parts and labor

Call for current pricing on repairs and terminals   604-582-1946

Stuck trying to repair a Wyse 60 terminal? 
 Order the Wyse 50/60 troubleshooting guide.  $50
This guide was written after over 1000 repairs of Wyse terminals.

 Includes fixes for 

bulletScreen squished at top or folds over
bulletLines on screen
bulletVertical shaking intermittently
bulletHigh failure parts list
bulletCommon intermittent problems and how to fix them
bulletCommunication problems
bulletNothing on screen
bulletCan't adjust focus
bulletHow to reset eeprom
bulletTesting com port
bullethigh pitch noise
bulletcharacters squished on left side of screen
bulletBlows Fuse
bulletCommon problems caused by inexperienced technicians
bulletWent up in smoke! (yes its repairable)

 

 

 

 

TrakMate